Stainless steel with high temperature ceramic coating, maximizes long life and durability in tough outdoor environments. A neutral black finish ensures a fit with all decors.
- Attractive brushed stainless steel finish
- Universal bracket easy upgrade from 3-burner to 5-burner heaters. No additional plumbing or wiring required.
- Bi-directional easy-pivot arm 25° rotation each side.
- Electronic ignition one or multiple units can be switched on and off simultaneously from a single remote-located switch.
- Automatic re-ignition should the gas heater not re-ignite for any reason, the integrated "Flame Failure Safety Shut-off Control" turns the heater off immediately.
- Stainless steel casing components are protected from tampering. Assists in preventing dirt and dust from accumulating on the wiring and components.
- Wind resistance up to 13 km/h or 8 mph
- 26,000 BTUS
- Heats up to 120 sqft
- Gas connection 3/8" SAE
- Electrical connection 110 Volt, 3-pin insulated plug
- Dimension (WxDxH) 19.29" x 14.09" x 14.25"
- Min. distance to combustible materials
- Sides: 3.6 / 1100mm
- (without heat deflector) Above (to ceiling): 36" / 1100mm
- (with heat deflector) Above (to ceiling): 12" / 350mm
- Mounting height requirement to ground 3 8 / 2438mm
- Weight (lb) 33lb
- Stylish and unique design
- Slim and streamlined
- Brushed stainless steel finish
- Patented design & technology
- Directional ceiling or wall mounts provides greater positioning versatility and heat coverage.
- Must only be installed by a licensed technician. Must complete Pre-Installation Checklist" before installing
- The temperature will not exceed 65°C/149°F above the ambient temperature at specified distance. Please consult material manufacturer for temperature ratings and suitability. Bromic Heating takes no responsibility for material compliance. 3 8 / 2438mm or maybe lower depending on local regulations
Angle View
